Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- Pre-owned
- Cornerstone Equipment
- 7360
- Lawn Mower
- Zero-Turn Mower
2019 Exmark Lazer Z X-Series EFI LZX740EKC526W0
LAZER Z X-SERIES EFI
What you get when you check all the boxes.And with our top-of-the-line Lazer Z EFI X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines. Which also features our exclusive EGov and RED Technology which help boost fuel efficiency. The X-Series EFI lawn mower also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
Features may include:
ECO-FRIENDLYReduces fuel consumption, fewer emissions and carbon footprint.
FUEL SAVINGSDelivers up to 25% in fuel savings.
REDUCE GREEN HOUSE GASESFuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
EASY TO STARTEasy start in any altitude or climate condition (no manual choke).
ENGINE EFFICIENCYClosed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
SEQUENTIAL FUEL INJECTIONDelivers the precise amount of fuel and spark where needed to maximize efficiency and power.
- Cornerstone Equipment
- Pre-owned
- 7360
- 2019
- Exmark
- Lazer Z X-Series EFI LZX740EKC526W0
- Lawn Mower
- Zero-Turn Mower
- 404532526
- Brand: Kohler® | Model: ECV740 | Series: Command™ EFI
- 747
- 3,650 RPM
- Heavy-duty canister air filtration system
- Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Gas EFI | Indicator: Yes - electronic Sender
- Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.| Wheel Release: Allows unit movement without engine running.
- Lever-actuated disc brake.
- Drive: 23 x 9.5-12, 4 ply Turf Master® | Caster: 13 x 5.0-6, smooth-tread, semi-pneumatic.
- Drive: 23 x 9.5-12, 4 ply Turf Master®
- 12-volt battery with 20-amp alternator.
- Blade: Approximately 18,500 fpm.
- Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Blade: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
- 52"
- 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
- 79.2 in. (201.2 cm) | Blade: 3 Blades at 18.00"
- 64.8 in. (164.6 cm)
- 12-gallon (45.4-L), single fuel tank with single fill location.
- Onboard Intelligence: RED Technology | Standard Features: 12-volt plug-in, engine hour meter and cup holder | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Casters: .50" thick caster yoke arms. | Floating Deck
- Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Full-floating UltraCut Series 6 with heavy-duty spindle. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.